6
Before using the appliance, always read the safety warnings.
This appliance shall not be used by children.
Keep the appliance and its cord out of reach
of children.
1. DESCRIPTION
1.1 Description of the appliance
(page 3 - A )
A1. Beans container lid
A2. Beans container
A3. Cup tray
A4. Steam dial
A5. Hot water spout
A6. Steam spout
A7. Cappuccino maker selection ring
A8. Cappuccino maker
A9. Cappuccino maker connection nozzle
A10. Cup grille for espresso
A11. Cup grille for glasses or mugs
A12. Drip tray grille
A13. Drip tray
A14. Drip tray water level indicator
A15. Water tank lid
A16. Water tank extraction handle
A17. Water tank
A18. Water softener filter housing
A19. Power cord connector socket
A20. Main switch (ON/OFF)
A21. Boiler outlet
A22. Coffee mill outlet (tamper station)
A23. Presser lever
1.2 Description of control panel
(page 3 - B )
B1. ON/Standby button
B2. Ground coffee quantity dial
B3. "X2" button: to use the 2 coffees Easy Clean filter
B4. Rinse button
B5. "OK" button: to deliver the beverage/confirm
B6. Hot water button
B7. "My" button: to customise beverage quantity
B8. Mode selector dial:
• Espresso
• Long Black
• Coffee
• Descaling
B9. Descale light
B10. Steam ready light
B11. Overtemperature light
B12. Energy saving light
B13. General alarm light
B14. Beans container empty/no beans container light
B15. No water light
B16. Pressing light
B17. Pressure gauge
1.3 Description of the accessories
(page 2 - C )
C1. Filter holder
C2. Easy Clean filter 1 coffee
C3. Easy Clean filter 2 coffee
C4. "Total Hardness Test" indicator paper
C5. Descaler
C6. Water softener filter (*if present)
C7. Power cord
C8. Tube brush
C9. Milk jug
2. PREPARING THE APPLIANCE
Wash all accessories with warm water and washing-up liquid,
then proceed as follows:
1. Insert the beans container (A2) in the coffee mill (fig. 1);
2. Insert the drip tray (A13) complete with cup grill (A11) and
drip tray grille (A12) (fig. 2);
3. Extract the water tank (A17) (fig. 3) and fill with fresh clean
water, taking care not to exceed the MAX level (fig. 4).
4. Put the tank back in the appliance.
Important
Never operate the appliance without water in the tank or without the
tank.
3. SETTING UP THE APPLIANCE
1. Plug the power cord connector (C7) into the socket (A19) at
the back of the appliance (fig. 5), then plug the plug into
the mains socket. Make sure the main switch (A20) at the
back of the appliance is pressed and in the
I
position (fig.
6);
2. The
light (B6) corresponding to the button comes on
and the
light (B15) flashes to indicate that you need
to deliver water to fill the circuit (fig. 7);
3. Place a container with a minimum capacity of 100 ml under
the hot water spout (A5) and cappuccino maker (A8) (fig.
8);
4. Press the button (B6) corresponding to the
light (fig.
9). Delivery begins and stops automatically. Empty the
container.
Before using the machine, you must rinse the internal circuits.
Proceed as follows:
5. Attach the filter holder (C1) complete with filter to the
appliance. To attach correctly, align the filter holder handle
Summary of Contents for La Specialista EC933 Series
