11
34
33
For thoroughly cleaning, use De'Longhi cleaner.
9. CUSTOMISING THE QUANTITY OF COFFEE
BEVERAGES WITH THE
BUTTON (B7)
1. Prepare the appliance to deliver 1 or 2 cups of the coffee
beverage you want to make, as far as attaching the filter
holder (C1) complete with the (C2) or (C3) filter and ground
coffee.
2. Select the coffee beverage to program, by turning the (B8)
dial.
3. Press the
button: the light corresponding to "OK" but-
ton (B5) comes on steadily and the light corresponding to
the
button flashes.
4. Press the "OK" button to start delivering the beverage. The
lights corresponding to the "OK" and
buttons flash.
5. When you have reached the desired quantity of the bever-
age, press the "OK" button again.
6. Press the
button to save the new setting. The appliance
is ready for use again and the
button remains on.
If you do not want to save the new setting, press any other
button.
Programming Long Black coffee: follow the procedure described
above for the quantities of both coffee and hot water.
Please note:
•
The coffee beverages can be programmed: you can not program steam and hot
water quantity.
•
"
X2
" drinks can be programmed separately.
9.1 Beverage reset
To reset the default beverage quantities, press and hold the
button (B7) until it goes off.
The selected beverage is reset to the default values.
10. DELIVERING HOT WATER
1. Choose the cup and place it on the correct cup grille ((A10)
or (A11));
2. Press the
button (B6): the appliance delivers hot
water from the spout (A5) then goes off automatically.
3. To stop delivery, press again the
button.
You should not deliver hot water for more
than 60 seconds.
11. CLEANING
11.1 Cleaning the machine
The following parts of the machine must be cleaned regularly:
- drip tray (A13) complete with cup grille (A11) and drip tray
grille (A12);
- espresso cup grille (A10);
- coffee filters (C2) and (C3);
- beans container (A2);
- coffee burrs;
- coffee mill outlet (A22) (smart tamping station);
- boiler outlet (A21);
- water tank (A17);
- cappuccino maker (A8) as described in section "8. Cleaning
the cappuccino maker after use".
Important!
• Do not use solvents, abrasive detergents or alcohol to clean
the coffee machine.
• Do not use metal objects to remove encrustations or coffee
deposits as they could scratch metal or plastic surfaces.
• None of the components of the appliance can be washed in
a dishwasher with the exception of the drip tray (A13) and
cup grilles (A10) and (A11).
• If the appliance is not used for more than a week, before
using it again, we recommend you perform a rinse cycle as
described in section "3. Setting up the appliance".
Danger!
• While cleaning, never immerse the coffee maker in water. It
is an electrical appliance.
• Before cleaning the outside of the appliance, turn it off,
unplug from the mains socket and allow to cool.
11.2 Cleaning the drip tray
The drip tray is fitted with a level
indicator (A14) showing the
amount of water it contains. Be-
fore the indicator protrudes from
the cup tray, the drip tray must
be emptied and cleaned, other-
wise the water may overflow the
edge and damage the appliance,
the surface it rests on or the sur-
rounding area.
35
Summary of Contents for La Specialista EC933 Series
