background image

4

IMPORTANT

After removing the packaging, make sure the appliance is com-
plete and undamaged. If in doubt, do not use the appliance
and contact qualified personnel only. 

Dispose of the plastic bag with care as it represents a hazard
for children.

If the socket and the plug on the appliance are incompatible,
the socket should be changed for a suitable type by a qualified
electrician who should ensure that the cross-section of the wires
leading to the socket is suitable for the power absorbed by the
appliance. 

Bear the following fundamental safety rules in mind:
-

Never touch the appliance with damp hands.

-

Never use the appliance with bare or wet feet.

-

Never immerse the appliance in water.

-

Do not aim the steam at people or animals.

-

Never unplug the appliance by pulling the power cable or
the appliance itself.

-

Never allow the appliance to be used by children or unfit
persons without supervision.

-

Never leave the appliance plugged in as it could be a
safety hazard.

-

Never place the iron under the tap to top up with water.
Always use the measure provided.

-

If the power cable is damaged, have it replaced immedia-
tely by a qualified electrician.

-

The safety of this appliance is guaranteed only if correctly
connected to a proper and effective earth connection as
specified by current electrical safety standards and regula-
tions. This fundamental safety requisite should be verified.
If in doubt, ask a qualified electrician to check the mains
system thoroughly. Failure to earth the appliance absolves
the manufacturer of all liability for damage.

When the appliance is to be discarded, after unplugging from
the mains, the lead should be cut as close as possible to the iron
to make the appliance unusable.

Before cleaning or servicing, disconnect the appliance by
unplugging from the mains.

GB

Summary of Contents for FXC 21








Reviews: