background image

10

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.

At the end of its working life, the product must not be dispo-
sed of as urban waste.
It must be taken to a special local authority differentiated
waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids pos-
sible negative consequences for the environment and health
deriving from inappropriate disposal and enables the con-
stituent materials to be recovered to obtain significant

savings in energy and resources.As a reminder of the need to dispose of hou-
sehold appliances separately, the product is marked with a crossed-out whee-
led dustbin.

  

A)  If your appliance comes fitted with a

plug, it will incorporate a 13 Amp fuse.
If it does not fit your socket, the plug
should be cut off from the mains lead,
and an appropriate plug fitted, as
below.
WARNING: Very carefully dispose
of the cut off plug after removing the
fuse: do not insert in a 13 Amp
socket elsewhere in the house as this
could cause a shock hazard.
With alternative plugs not incorpora-
ting a fuse, the circuit must be pro-
tected by a 15 Amp fuse.

If the plug is a moulded-on type, the
fuse cover must be re-fitted when
changing the fuse using a 13 Amp
Asta approved fuse to BS 1362. In
the event of losing the fuse cover, the
plug must NOT be used until a repla-
cement fuse cover can be obtained
from your nearest electrical dealer.
The colour of the correct replacement
fuse cover is that as marked on the
base of the plug.

B)

If your appliance is not fitted with a
plug, please follow the instructions
provided below:

WARNING -

THIS APPLIANCE MUST BE

EARTHED

IMPORTANT

The wires in the mains lead are coloured
in accordance with the following code:

Green and yellow:

Earth

Blue:

Neutral

Brown:

Live

As the colours of the wires in the mains
lead  may not correspond with the colou-
red markings identifying the terminals in
your plug, proceed as follows:

The green and yellow wire must be con-
nected to the terminal in the plug marked
with the letter E or the earth symbol

or coloured green or green and

yellow.
The blue wire must be connected to the
terminal marked with the letter N or
coloured black.
The brown wire must be connected to the
terminal marked with the letter L or
coloured red.

N

E

L

ELECTRICAL CONNECTION (UK ONLY)

Summary of Contents for FXC 21








Reviews: