7
DRY IRONING
•
Plug in the iron and select the temperature by turning the ther-
mostat dial
D
. If there is water in the tank
B
, turn the steam
regulator
I
to the
position (=dry) (fig. 1).
•
Wait until the indicator light
L
goes off showing that the requi-
red temperature has been reached.
STEAM BURST (FIG. 7)
•
Turn the steam regulator
I
to the
position (=dry) (fig. 1).
•
Turn the thermostat dial
D
to MAX. When the indicator light L
goes off, press the steam burst button
G
a number of times until
the indicator light
L
comes on again. Wait until the light goes
off before pressing the button again.
VERTICAL IRONING (FIG. 7)
Enables delicate garments to be steamed without resting them on
the ironing board:
pay attention to the temperature used to steam
hanging fabrics.
•
Turn the steam regulator
I
to the
position (=dry) (fig. 1).
•
Turn the thermostat dial
D
to MAX. When the indicator light
L
goes off, place the iron in a vertical position and hold it near
the garment. Press the steam burst button
G
a number of times
until the indicator light
L
comes on again. Wait until the light
goes off before pressing the button again.
Never direct the "vertical" steam jet at a garment hanging in a
wardrobe or worn by a person. Vertical ironing should always be
carried out with the garment hanging on a clothes stand and
always away from other garments, elements or people.
Remember that the steam function can only be used when the
thermostat dial is positioned in the segment.
regulator
I
is in the
0
position ( =dry) (fig.1).
Note: On the iron there is a useful guide giving information on the
temperature to set according to the garment being ironed:
●
Synthetic;
●●
Silk;
●●●
Cotton.
