13
Customising the “MY COFFEE” quantity
The appliance is set by default to automatically
deliver 30 ml of “my coffee”.
To modify these settings, proceed as follows:
1. Place a cup under the coffee spouts (fig.
13).
2. Turn the selection knob(B6) until the pilot
lamp
switches on.
3. Keep the
button (fig. 10) pressed until
the message “1 My CoFFee PrograM
QuanTiTy” is displayed and coffee delivery
begins. release the button.
4. as soon as the coffee in the cup reaches the
required level, press the 1 cup button
again.
The quantity of coffee in the cup has now been
programmed.
Regolazione del macinacaffè
The coffee mill is preset in the factory to make
coffee correctly and should not require adjusting
initially.
however, if after making the first few coffees you
find that the coffee is too thin and not creamy
enough or that delivery is too slow (a drop at
a time), this can be corrected by adjusting the
grinding adjustment knob (fig. 11).
Please note!
The grinding adjustment knob must only be
turned when the coffee mill is in operation.
For fuller bodied creamier
coffee, turn one click
anticlockwise towards “1”
(finer ground coffee).
For faster delivery (not a
drop at a time), turn one
click clockwise towards “7”
(coarser ground coffee).
These adjustments will only be evident after
at least 2 cups of coffee have been delivered.
if delivery is still too fast or too slow, repeat
the correction, turning the knob another click.
Tips for a hotter coffee:
For a hotter coffee, you are recommended to:
•
perform a rinse cycle before delivering the
coffee: press the
button
to select the
“rinsing...” function
:
hot water is delivered
from the spout, heating the internal circuits
and making the coffee delivered hotter
;
• enable the cup warmer and leave the cups to
warm;
• warm the cups by rinsing them with hot
water (using the hot water function);
• set the “high” coffee temperature in the
menu.
Danger of burns!
during rinsing, a little hot water comes out of
the coffee spouts and is collected in the drip tray
underneath.
avoid contact with splashes of water.
Preparing coffee using coffee beans
Important!
do not use caramelised or candied coffee beans
as they could stick to the coffee mill and make it
unusable.
1.
Fill the container with coffee beans
(fig. 12).
2.
Place under the coffee spouts:
-
1 cup, if you want 1 coffee
(fig. 9);
-
2 cups, if you want 2 coffees.
3.
lower the spouts as near as possible to the
cup. This makes a creamier coffee
(fig. 9).
4. Press the button corresponding to the
number of coffees required (1 cup
or 2
cups
) (fig. 10 e 13).
5.
Preparation begins. The amount of coffee
selected is displayed together with a progress
bar which gradually fills as preparation
progresses
(fig. 14).
once the coffee has been made, the appliance
prepares for use again.
Please note:
•
While the machine is making coffee, delivery
can be interrupted at any moment by pressing
one of the coffee buttons
(
or
).
•
at the end of delivery, to increase the quantity
of coffee in the cup, just press (within 3
seconds) one of the coffee buttons
(
or
).
once the coffee has been made, the appliance is
ready to use again.
Important!
if the coffee is delivered a drop at a time, too thin
