11
3. Press the
button;
4. Turn the selection knob until the required
language is displayed;
5. Press the
button to confirm;
6. Press the
button to exit the menu.
Energy Saving
use this function to activate or deactivate energy
saving mode. This mode is active by default,
reducing energy consumption in compliance
with current european regulations.
When energy saving mode is active, an asterisk
appears below “energy Saving” in the menu.
1. Press the P button to enter the menu;
2. Turn the selection knob until “energy Saving”
is displayed;
3. Press the
button:
“disable?” is
displayed, or “enable?” if the function has
already been disabled.
4. Press the
button
to disable or enable
the function or
button
to exit the
menu.
When the function is enabled, if the appliance is
not used for about 1 minute, “energy Saving” is
displayed.
Please note!
a few seconds may elapse between energy
saving mode and delivery of the first coffee.
Cup warmer
This function enables the cup warmer to be
enabled or disabled. Proceed as follows:
1. Press the P button to enter the menu;
2. Turn the selection knob until
“Cup warmer”
is displayed;
3.
Press the
button;
“enable?” is
displayed, or “disable?” if the function has
already been enabled.
4.
Press the
button
to enable or disable
the function or
button
to exit the
menu.
Warming the cups keeps the coffee hot.
Adjust time
To adjust the time on the display, proceed as
follows:
1. Press the P button to enter the menu;
2. Turn the selection knob until
“adjust time” is
displayed;
3.
Press the
button:
the hours flash on
the display;
4. Turn the selection knob to change the
hours;
5. Press the
button to confirm.
The
minutes flash on the display;
6. Turn the selection knob to change the
minutes;
7. Press the
button to confirm;
8. Press the
button to exit the menu.
Auto-start
you can set the auto-start time in order to
have the appliance ready at a certain time (for
example in the morning) so you can make coffee
immediately.
Please note!
To activate this function, the time must already
have been set correctly.
1. Press the P button to enter the menu;
2. Turn the selection knob until
“auto-start
disabled” is displayed
;
3.
Press the
button:
“enable?” is
displayed
;
4.
Press the
button:
the hours flash on
the display
;
5. Turn the selection knob to change the hours;
6.
Press the
button to confirm.
The
minutes flash on the display
;
7. Turn the selection knob to change the
minutes;
8. Press the
button to confirm:
“auto-
start enabled” and the
symbol are
displayed
.
9. Press the
button to exit the menu.
The
symbol appears next to the
clock to indicate that auto-start has been
programmed.
To disable the function:
1. Press the P button to enter the menu;
2. Turn the selection knob until
“auto-start
enabled”
and the symbol
are displayed;
3. Press the
button: “deactivate?” is
displayed;
4. Press the
button to confirm.
