25
DISPLAYED MESSAGE
POSSIBLE CAUSE
REMEDY
FILL TANK WITH FRESH
WATER
Insufficient water in the tank (A16).
Fill the tank with water and/or insert it correct-
ly, pushing it as far as it will go until it clicks
into place.
INSERT WATER TANK
The tank (A16) is not correctly in place.
Insert the tank correctly and press as far as it
will go.
EMPTY GROUNDS CONTAINER The grounds container (A10) is full.
Empty the grounds container and drip tray
(A14), clean and replace. Important: when
removing the drip tray, the grounds contain-
er must be emptied, even if it contains few
grounds. If this is not done, when you make the
next coffees, the grounds container may fill up
more than expected and clog the machine.
DISPLAYED MESSAGE
POSSIBLE CAUSE
REMEDY
INSERT GROUNDS CONTAINER After cleaning, the grounds container (A10) has
not been replaced.
Remove the drip tray (A14) and insert the
grounds container.
ADD GROUND COFFEE MAX.
ONE MEASURE
ESC
The "pre-ground coffee" function has been se-
lected without placing any pre-ground coffee
in the funnel (A4).
Place pre-ground coffee in the funnel (fig. 13)
and repeat delivery
ADD GROUND COFFEE MAX.
ONE MEASURE
OK
A LONG coffee with pre-ground coffee has been
requested
Place pre-ground coffee in the funnel (A4) (fig.
13) and press " OK " to continue and com-
plete delivery.
FILL BEANS CONTAINER
ESC
The coffee beans have run out.
Fill the beans container(A3 - fig. 11).
The pre-ground coffee funnel (A4) is clogged.
Empty the funnel with the help of the brush
(C5) as described in section “15.8 Cleaning the
pre-ground coffee funnel”.
