11
14
15
4. Place the lid back on the milk container;
5. Remove the hot water spout (C6) from the nozzle (A8) (fig.
15);
6. Attach the container to the connection nozzle and push
as far as it will go (fig. 16). The machine emits a beep (if
enabled);
17
16
16
7. Place a sufficiently large cup under the coffee spouts (A9)
and the frothed milk spout (D5). Adjust the length of the
milk spout. To move it nearer the cup, simply pull it down-
wards (fig. 17).
8. Follow the instructions below for each function.
14.2 Adjusting the amount of froth
Turn the froth adjustment dial (D1) to adjust the amount of froth
on the milk delivered while making cappuccinos and milk-based
coffees (fig. 18).
18
Dial
position
Description
Recommended for…
No froth
HOT MILK (not frothed)
Min. froth
LATTE MACCHIATO
Max. froth
CAPPUCCINO / HOT MILK
(frothed)
14.3 Making milk beverages automatically
1. Fill the milk container (D) and attach it as described above;
2. Select the required beverage:
-
: Cappuccino (B12)
-
: Macchiato (B13)
-
: Hot Milk (B14)
3. After a few seconds, the appliance starts preparing the se-
lected beverage automatically.
4. Depending on the beverage selected, the appliance deliv-
ers one or two ingredients automatically.
Please note:
• To interrupt preparation and delivery, if so desired, press
the icon relative to any other beverage. Conversely, to in-
terrupt the first step and pass straight on to the second,
press the icon of the selected beverage.
• Do not leave the milk container out of the refrigerator for
long periods. The warmer the milk (5°C is ideal), the poorer
the quality of froth produced.
14.4 Customizing milk beverages
To customize milk beverages, proceed as follows:
1. Place a sufficiently large cup or glass under the coffee
spouts (A19);
2. Press and hold the icon corresponding to the beverage to
be customized: the icon blinks and all the alarm indicator
lights also blink;