9
B12.
: TrueBrew Over Ice (TM) Coffee
B13.
: “Long”
B14.
ESC
:
- on steadily: press to turn the steam function on (
when in
the settings menu: press to exit the current programming)
- flashing: the steam/hot water dial (A23) must be turned
on or off
B15.
OK
: to perform a rinse cycle.
(When in the settings menu: press to confirm the current
programming)
Description of the accessories
(page 2 - C )
C1. “Total hardness test” Indicator paper
C2. Pre-ground coffee measurng scoop
C3. Descaler
C4. Water softener filter (certain models only)
C5. Cleaning brush
3. BEFORE USE
3.1 Checking the machine
After removing the packaging, make sure the product is com-
plete and undamaged and that all accessories (C) are pres-
ent. Do not use the machine if it is visibly damaged. Contact
De’Longhi Customer Services.
3.2 Installing the machine
Important!
When you install the machine, you should respect the following
safety warnings:
• The machine gives off heat. After positioning the machine
on the worktop, leave a space of at least 1.18 in / 3 cm be-
tween the surfaces of the machine and the side and rear
walls and at least 5.9 in/15 cm above the coffee maker.
• Water penetrating the coffee machine could cause
damage.
Do not place the machine near taps or sinks.
• The machine could be damaged if the water it contains
freezes.
Do not install the machine in a room where the tempera-
ture could drop below freezing point.
•
Arrange the power cord (A9) in such a way that it cannot be
damaged by sharp edges or contact with hot surfaces (e.g.
electric hot plates).
3.3 Connecting the machine
Important!
Check that the main power supply voltage corresponds to that
indicated on the rating plate on the bottom of the machine.
Connect the machine to an efficiently earthed and correctly in-
stalled socket with a minimum current rating of 10A only.
If the power socket does not match the plug on the machine,
have the socket replaced with a suitable type by a qualified
professional.
3.4 Setting up the machine
Please note:
• Coffee has been used to factory test the machine and it is
therefore completely normal for there to be traces of coffee
in the grinder. The machine is, however, guaranteed to be
new.
• You should customise water hardness as soon as possible
following the instructions in section “19. Setting water
hardness”.
Proceed as described:
1. Plug the machine into the mains socket and press the main
switch (A6) on the back of the machine (fig. 1).
2. The
light (B3) flashes on the touch screen (B): Re-
move the water tank (A17 - fig. 2), fill to the MAX line with
fresh water (fig. 3A) then put back in the machine (fig. 3B).
3. The
icon (B14 - fig. 5) flashes on the touch screen.
4. Place a container with a minimum capacity of 3.38 floz/100
ml under the frother (A20) (fig. 4).
5. Turn the steam/hot water dial (A23) to the "I" position (fig.
6) and press the
OK
icon (B15). Water is delivered
from the frother.
6. When
delivery stops automatically, the
icon flashes
on the touch screen to indicate that the steam dial must be
turned back to the "
O
" position.
The machine goes off.
To use it, press the
button (A24 - fig. 7).
Please note:
• The first time you use the machine, you need to make 4-5
cups of coffee before it starts to give satisfactory results.
• To enjoy your coffee even more and improve the perfor-
mance of your machine, we recommend installing a water
softener filter (C4) as described in section “20. Water sof-
tener filter”. If your model is not provided with a filter, you
can request one from De'Longhi Customer Services.
