13
STRONG
X-STRONG
(see “13.5 Making coffee
using pre-ground coffee”)
Please note:
• The variation in strength is not saved and the next time a
beverage is delivered automatically, the machine selects
the default value.
• If a few seconds elapse between temporary customising
of the strength and delivery of the beverage, the aroma
returns to the default value.
13.5 Making coffee using pre-ground coffee
Important!
• Never add pre-ground coffee
when the machine is off or it
could spread through the inside
of the machine and dirty it. This
could damage the machine.
• Never use more than 1 level
measure (C2) or it could dirty the inside of the coffee ma-
chine or block the funnel (A4).
Please note:
If you use pre-ground coffee, you can only make one cup of
coffee at a time.
1. Press the
icon (B8) repeatedly until the
light
(B6) comes on.
2. Make sure the funnel is not blocked, then add one level
measure of pre-ground coffee (fig. 12).
3. Place a cup under the coffee spouts (A19) (fig. 10).
4. Then select the desired coffee:
Recipe
Quantity
Espresso (B10)
≃
1.35 floz/40 ml
Espresso Lungo (B11)
≃
4.06 floz / 120 ml
Long (B13)
≃
5.41 floz / 160 ml
5. Preparation begins. When delivery finishes, the light corre-
sponding to the selected icon flashes on the touch screen
(B) indicating the possibility to increase the quantity in the
cup, within 3 seconds, by pressing the icon.
Important! Making LONG coffee
using pre-
ground coffee:
Halfway through preparation, the
light flashes. Add one
level measure of pre-ground coffee and press
OK
(B15).
Please note:
If "Energy Saving" mode is active, you may have to wait a few
seconds before the first coffee is delivered.
13.6 Customising strength and quantity
The machine is set by default to make coffee with a standard
strength and quantity (see table in section “13.3 Making coffee
using coffee beans”).
To customise the coffee, proceed as follows:
1. Place a sufficiently large cup or glass under the coffee
spouts (A19);
2. Press (B8) to select the required aroma (see section
“13.4 Temporarily varying the coffee strength”);
3. Press and hold the icon corresponding to the coffee to be
customised. The icon flashes and all the alarm lights flash 4
times;
4. Release the icon. The icon flashes and the machine starts
delivering coffee;
5. As soon as the coffee in the cup reaches the required level,
press the coffee icon again.
The strength and quantity of coffee in the cup has now been
programmed.
14. MAKING TRUEBREW OVER ICE™
1. Place 3 ice cubes in a large glass, press the strength selec-
tor
(B8) to choose a strength (strong or extra strong
recommended), and place the glass under the brewing
unit;
4. Then, press the TrueBrew Over Ice™ button to brew the
coffee (fig. 14);
5. Add 3 more ice cubes to the glass/coffee plus any syrup,
sweetener or milk desired and enjoy.
Important!
Always use glasses resistant to thermal shock.
14.1 Programming TrueBrew Over Ice™ lenght
1. Press the TrueBrew Over Ice™ button (B12):
(B8)
flashes indicating that it is necessary to select the strength;
2. Press (B8) to select the required strength (see sec-
tion “13.4 Temporarily varying the coffee strength”) ;
