13
Important!
RINSE WITH WATER ONLY
NO WASHING UP LIQUID - NO DISHWASHER
Clean the infuser without using washing up liquid as it
could be damaged.
6. Use a brush (if included with your model, use the accessory
(D5) provided) to remove any coffee residues left in the
infuser housing, visible through the infuser door;
7. After cleaning, replace the infuser by sliding it onto the in-
ternal support, then push the PUSH symbol fully in until it
clicks into place (fig. 29).
Please note!
If the infuser is difficult to insert, before insertion, adapt it to the
right size by pressing the two levers (fig. 30).
8. Once inserted, make sure the two coloured buttons have
snapped out (fig. 31).
9. Close the infuser door;
10. Put the water tank back.
11.10 Cleaning the milk container
Clean the milk container (E) each time you prepare milk as de-
scribed below:
1. Remove the lid (E2).
2. Remove the milk spout (E5) and intake tube (E4).
3. Turn the froth adjustment dial (E1) anticlockwise to the
"INSERT" position (fig. 32) and pull off upwards.
4. All components and the container are dishwasher safe, pla-
cing them in the top basket. If you do not have a dishwasher,
wash by hand as described in the note at the end of the
section.
33
Make sure there are no milk re-
sidues on the hollow and groo-
ve under the dial (fig. 33). If
necessary, scrape the groove
with a toothpick;
34
5. Rinse inside the froth
adjustment dial seat with
running water (fig. 34).
6. Check that the intake tube
and milk spout are not
clogged with milk residues.
7. Replace the dial (in
correspondence to the
word "INSERT"), spout and
milk intake tube.
8. Place the lid back on the
milk container.
Please note: washing by hand
Washing in a dishwasher guarantees the perfect hygiene of all
the milk container components. When washing by hand, wash
all components of the milk container thoroughly with hot water
and immerse them in a basin of hot water for 30 minutes before
proceeding as described in point 5.
11.11 Cleaning the hot water/steam nozzle
Each time you prepare milk, clean the connection nozzle (A18)
with a sponge to remove milk residues from the gaskets (fig.
22).
12. DESCALING
Important!
• Before use, read the instructions and the labelling on the de-
scaler pack.
• It is important to use De’Longhi descaler only. Using un-
suitable descaler and/or performing descaling incorrectly
may result in faults not covered by the manufacturer's
guarantee.
• Descaler could damage delicate surfaces. If the product is
accidentally spilt, dry immediately.
To descale
Descaler
De’Longhi descaler
Container
Recommended capacity: 1.8
Time
~45min
Descale the appliance when the
light (B15)on the display
(B) comes on.
35
1. Turn the machine on and
wait until it is ready for
use.
2. Press the
button
(C5). The lights shown
in fig. 35 come on and
the
(B22) and
(B21) lights flash.
38
