9
Turn dial
Selected level
Correspondence to
indicator paper
Soft water
Slightly hard
water
Hard water
Very hard water
4. Press the
button (C6) to confirm. The
light (B18)
comes on to indicate that the appliance is saving the new
setting. (To cancel, press the
button corresponding to
).
The machine is now reprogrammed with the new water
hardness setting.
6.3 Default values (reset)
This resets the default water hardness.
Proceed as follows:
1. With the appliance on, press the button
(C3) for about
6 seconds.
2. Press the button until the lights shown in fig. 6 come
on: Lights
(B22) and
(B21) flash.
3. Press the
button (C6) to confirm. The lights shown in
fig. 7 flash to indicate that the appliance is resetting the
default values. (To cancel the operation, press the
button (C5) corresponding to
).
7. MAKING COFFEE
7.1 Selecting the coffee taste
The appliance is set by default to make coffee with a standard
taste.
Any one of these tastes can be selected:
Light taste
Standard taste
Strong taste
To change the taste, press the aroma selection button
(C2) (fig. 8) repeatedly until the required taste appears on the
display.
7.2 Selecting the quantity of coffee in the cup
To select the quantity of coffee, turn the selection dial (C7) (fig.
9) until the light corresponding to the required quantity of cof-
fee comes on:
Coffee selected
Quantity in cup
(ml)
2 cups or
double
quantity
ESPRESSO
40ml
Press
E S P R E S S O
LUNGO
120ml
LONG
160ml
--
To deliver 2 cups of coffee or a double quantity of coffee, press
the button (C4). The corresponding light comes on.
7.3 Adjusting the coffee mill
The coffee mill is factory-set in such a way that the coffee will
be delivered correctly and should not require regulating initially.
However, if after making the first few coffees you find that the
coffee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by adjusting
the grinding dial (A1) (fig. 10).
Please note!
The grinding adjustment dial must only be turned when the
coffee mill is in operation.
If the coffee is delivered too slowly or
not at all, turn one click clockwise to-
wards "7".
For fuller bodied creamier coffee, turn
one click anticlockwise towards 1 (do
not turn more than one click at a time
otherwise the coffee could be delivered
a drop at a time).
The effect of the adjustment will be noticed only after making
a further 2 cups of coffee, at least. If this adjustment does not
produce the desired result, turn the dial another click.
7.4 Tips for a hotter coffee
For hotter coffee, proceed as follows:
• perform a rinse cycle before delivering the coffee by pres-
sing the
button (C3). Hot water is delivered from the
coffee spouts (A17) and hot water spout (if inserted) to
heat the internal circuits of the appliance and deliver a
hotter coffee.
Danger of burns!
Hot water is delivered from the hot
water spout (if inserted).
• warm the cups with hot water using the hot water function
(see section “9. Heating water”).
