background image

18

TROUBLESHOOTING

Below is a list of some of the possible malfunctions. 
If the problem cannot be resolved as described, contact customer services.

GENERAL ALARM

The inside of the appliance is very dirty.

Clean the inside of the appliance thoroughly, 
as described in the section “Cleaning” (page 
13). If the message is still displayed after cle-
aning, contact De’Longhi Customer Services.

REPLACE FILTER

The water softener filter has been used up.

Replace the filter or remove it as described in 
the section “Water softener filter” (page 15).

EMPTY CIRCUIT   FILL CIRCUIT  

alternating 

WITH HOT WATER PRESS OK

The water circuit is empty.

Press OK to deliver water from the spout until it 
flows out normally.

PROBLEM

POSSIBLE CAUSE

SOLUTION

The coffee is not hot.

The cups were not preheated.

Warm the cups by rinsing them with hot water.
(N.B. you can use the hot water function).

The infuser has cooled down because 2/3 mi-
nutes have elapsed since the last coffee was 
made.

Before making coffee, heat up the infuser by 
pressing the 

  button.

A low coffee temperature is set.

Set a high coffee temperature in the menu.

The coffee is weak or not 
creamy enough.

The coffee is ground too coarsely.

Turn the grinding dial one click anticlockwise 
towards “1” while the coffee mill is in operation 
(fig. 8).
Continue one click at a time until coffee delive-
ry is satisfactory.
The effect is only visible after 2 coffees have 
been made (see the section “Adjusting the 
grinder” on page 11).

The coffee is unsuitable.

Use pre-ground coffee for espresso machines.

The coffee is delivered too 
slowly or in drops.

The coffee is ground too finely.

Turn the grinding dial one click clockwise to “7” 
while the coffee mill is in operation (fig. 10). 
Continue one click at a time until coffee delive-
ry is satisfactory. The effect is only visible after 
2 coffees have been made (see the section 
“Adjusting the grinder” on page 11).

Coffee does not come out of 
one or both spouts.

The spouts are blocked.

Clean the spouts with a toothpick.

The frothed milk has large 
bubbles

The milk is not cold enough or is not semi-
skimmed.

You should ideally use skimmed or semi-skim-
med milk at refrigerator temperature (about 
5°C). If the result is not as you wished, try 
changing brand of milk.

Summary of Contents for ECAM22.32 Series





















Reviews: