17
MESSAGES DISPLAYED
MESSAGE DISPLAYED
POSSIBLE CAUSE
SOLUTION
FILL TANK
Insufficient water in the tank.
Fill the tank with water and/or insert it cor-
rectly, pushing it as far as it will go until it clicks
into place (fig. 4).
EMPTY GROUNDS CONTAINER The grounds container (A13) is full.
Empty the grounds container and drip tray,
clean and replace (fig. 23).
Important: When removing the drip tray, the
grounds container must be emptied, even if it
contains few grounds.
If this is not done, when you make the next
coffees, the grounds container may fill up more
than expected and clog the machine.
GROUND TOO FINE ADJUST
MILL
alternating
WITH TURN STEAM KNOB
The grinding is too fine and the coffee is deli-
vered too slowly or not at all.
Repeat coffee delivery and turn the grinding
dial (fig. 8) one click clockwise towards “7”
while the coffee mill is in operation. If after
making at least 2 coffees delivery is still too
slow, repeat the correction procedure, turning
the grinding dial another click until delivery is
correct (see the section “Adjusting the grinder”
on page 11).
If the problem persists, turn the steam knob to
the I position and let some water run from the
cappuccino maker.
INSERT GROUNDS CONTAINER
After cleaning, the grounds container has not
been replaced.
Remove the drip tray and insert the grounds
container.
ADD PRE-GROUND COFFEE
The “pre-ground coffee” function has been se-
lected without placing any pre-ground coffee
in the funnel.
Place pre-ground coffee in the funnel or dese-
lect the pre-ground function.
DESCALE
The machine must be descaled.
The descaling procedure described in the “De-
scaling” section (page 14) needs to be perfor-
med as soon as possible.
LESS COFFEE
Too much coffee has been used.
Select a milder taste or reduce the quantity of
pre-ground coffee.
FILL BEANS CONTAINER
The coffee beans have run out.
Fill the beans container.
The pre-ground coffee funnel is clogged.
Empty the funnel with the help of a brush,
as described in the section “Cleaning the pre-
ground coffee funnel”.
INSERT INFUSER ASSEMBLY
The infuser has not been properly replaced
after cleaning.
Insert the infuser as described in the section
“Cleaning the infuser” (page 14).
INSERT TANK
The tank is not correctly in place.
Insert the tank correctly and press as far as it
will go.
Summary of Contents for ECAM22.32 Series
