DeLonghi ECAM22.32 Series, Instructions For Use Manual

Page: 11 / 20

10
Adjust time
To adjust the time on the display, proceed as follows:
1. Press the MENU button to access the menu;
2. Press the or button until “Adjust time” is
displayed;
3. Press the button ;
4. Press the or button to change the hour;
5. Press the button to confirm;
6. Press the or button to change the minutes;
7. Press the button to confirm.
The time is set: press
MENU
to exit menu.
Auto-off
Auto-off can be set so that the appliance turns off after 15 or 30
minutes, or after 1, 2 or 3 hours.
1. Press the
MENU button to access the menu;
2. Press the or button until “Auto-off” is displayed;
3. Press the button ;
4. Press the or until the number of minutes/hours of
operation is displayed (15 or 30 minutes, or 1, 2 or 3 hours);
5. Press the button to confirm.
The auto-off is set. Press MENU to exit menu.
Auto-start
You can set the auto-start time in order to have the appliance
ready for use at a certain time (for example in the morning) so
you can make coffee immediately.
Please note :
To enable this function you must ensure the time is set correctly.
1. Press the
MENU button to access the menu;
2. Press the or button until “Auto-start” is displayed;
3. Press the button and “Enable?” is displayed;
4. Press the button to confirm;
5. Press the or button to choose the hour;
6. Press the button to confirm;
7. Press the or button to change the minutes;
8. Press the button to confirm;
9. Then press MENU to exit menu.
Once the time has been confirmed, activation of auto-start is
indicated by the symbol
which is displayed alongside the
time and under the Auto-start item in the menu.
To disable the function:
1. Select auto-start from the menu;
2. Press the
button and “Disable?” is displayed;
3. Press the button to confirm.
The symbol is no longer displayed.
Setting the temperature
If you want to modify the temperature of the water used to
make the coffee (low, medium, high), proceed as follows:
1. Press the MENU button to access the menu;
2. Press the or button until “Set temperature” is
displayed;
3. Press the button ;
4. Press the or button until the required
temperature is displayed (low, medium, high);
5. Press the button to confirm.
The temperature is set. Press
MENU
to exit menu.
Energy saving
Use this function to enable or disable Energy Saving. When
enabled, the function reduces energy consumption in
compliance with EU regulations. When energy saving mode is
enabled an asterisk appears under “Energy saving” in the menu.
1. Press the
MENU button to access the menu;
2. Press the or button until “Energy saving” is
displayed;
3. Press the button and “Enable?” or “Disable?” is
displayed;
4. Press the button to enable or disable the energy
saving mode;
Then press MENU to exit menu.
When the function is enabled, if the machine is not used for
about 1 minute “Energy saving” is displayed.
Please note :
When in energy saving mode, a few seconds may elapse before
the first coffee is delivered as the appliance must heat up
again.
Setting water hardness
For instructions on setting water hardness, see page 15.
Setting the language
To change the language on the display, proceed as follows:
1. Press the
MENU button to access the menu;
2. Press the or button until “Set language” is
displayed;
3. Press the button ;
4. Press the or button until the required language is
displayed ;
5. Press the button to confirm;
The language is set. Press MENU to exit menu.
Install filter
For instructions on installing the filter, see section on “Installing
the filter” (page 15).
Replacing the filter
For instructions on replacing the filter, see section on “Replac-
ing the filter” (page 10).