11
Default values (reset)
This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as set).
1. Press the MENU button to access the menu;
2. Press the
or
button until “Default values” is
displayed;
3. Press the button
;
4. The message “Confirm?” appears on the display;
5. Press the
button to confirm and exit.
Statistics function
This displays statistics relating to the machine. To display,
proceed as follows:
1. Press the
MENU
button to access the menu;
2. Press the
or
button until “Statistics” is displayed;
3. Press the button
;
4. By pressing the
or
button you can check:
- how many coffees have been made;
- how many times the machine has been descaled;
- the total number of litres of water delivered;
- how many times the water filter has been replaced.
5. Then press the
button twice to exit menu.
MAKING COFFEE
Selecting the coffee taste
The appliance is set by default to make coffee with a standard
taste.
You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste
To change the taste, press the
button repeatedly
(fig. 7) until the required taste is displayed.
Selecting the quantity of coffee in the cup
The appliance is set by default to automatically make the
following quantities of coffee:
- short espresso coffee, when the
button is pressed
(
≃
40ml);
- long espresso coffee when the
button is pressed
(
≃
120ml);
- two short espresso coffees when the
button is
pressed;
- two long espresso coffees when the
button is
pressed.
To change the quantity of coffee the appliance delivers
automatically into the cup, proceed as described below:
- press the button corresponding to the quantity to be
modified and hold it down until “Program quantity” is
displayed, then release the button;
- when the coffee in the cup reaches the desired level, press
the same button again to memorise the new amount.
The machine is now reprogrammed with the new quantities.
Adjusting the grinder
The coffee mill is set by default to prepare coffee correctly and
should not require regulating initially.
However, if after making the first few coffees you find that the
coffee is either too weak and not creamy enough or delivery
is too slow (in drops), this can be corrected by adjusting the
grinding dial (fig. 8).
Please note :
The grinding dial must only be turned while the coffee mill is
in operation.
If the coffee is delivered too slowly or
not at all, turn one click clockwise.
For fuller bodied creamier coffee, turn
one click anticlockwise (do not turn
more than one click at a time other-
wise the coffee could be delivered in
drops).
These adjustments will only be evident after at least 2 cups of
coffee have been delivered.
If this adjustment does not obtain the desired result, turn the
dial another click.
Tips for a hotter coffee
For hotter coffee, you should:
• before delivering the coffee, perform a rinse cycle by
pressing the
button. Hot water is delivered from the
spout, heating the internal circuits of the appliance and
thus raising the coffee temperature;
• warm the cups by rinsing them with hot water (using the
hot water function);
• increase the temperature of the coffee in the menu (page
10).
Making coffee using coffee beans
Important!
Do not use caramelised or candied coffee beans as they could
stick to the coffee mill and damage it.
1. Fill the container with coffee beans (fig. 9).
2.
Place under the coffee spouts:
Summary of Contents for ECAM22.32 Series
