DeLonghi Dinamica Plus ECAM37X.95, Instructions For Use Manual

Page: 9 / 26

8
2.4 Description of the accessories
(page 2 - D)
D1. "Total Hardness Test" indicator paper (attached to page 2
of the English instructions)
D2. Pre-ground coffee measure
D3. Descaler
D4. Water softener filter (certain models only)
D5. Cleaning brush
D6. Hot water spout
D7. Power cord
2.5 Description of the milk container (page 2 - E)
E1. Froth adjustment and CLEAN dial
E2. Milk container lid
E3. Milk container
E4. Milk intake tube
E5. Frothed milk spout (adjustable)
3. SETTING UP THE APPLIANCE
Please note!
• The first time you use the machine, the water circuit is
empty and the appliance could be very noisy. The noise
becomes less as the circuit fills.
• Coffee has been used to factory test the appliance and it
is therefore completely normal for there to be traces of
coffee in the mill. The machine is, however, guaranteed to
be new.
• You should customise water hardness as soon as possible
following the instructions in section "15. Setting water
hardness".
1. Insert the power cable connector (D7) into the socket (A21)
at the back of the appliance and connect the appliance to
the mains electricity supply (fig. 1). Make sure the main
switch (A22) at the back of the appliance is pressed (fig. 2);
2. "SELECT LANGUAGE": Press and hold until
the required language appears on the display, then press
the flag corresponding to the language.
Follow the instructions indicated on the appliance display:
3. "FILL TANK WITH" "FRESH WATER": remove the water tank
(A17) (fig. 3), fill to the MAX line (marked on the tank) with
fresh water (fig. 4, then put the tank back in the appliance
(fig. 5);
4. "INSERT WATER SPOUT": Check that the hot water spout
(D6) is inserted on the connection nozzle (A8) (fig. 6) and
place a container holding a minimum of 100 ml under-
neath (fig. 7);
5. "WATER CIRCUIT EMPTY" "PRESS OK TO START": press
to confirm. The appliance delivers hot
water from the spout (fig. 8) then goes off automatically.
The coffee machine is now ready for normal use.
Please note!
• The first time you use the appliance, you need to make 4-5
cappuccinos before it starts to give satisfactory results.
• When making the first 5-6 cappuccinos, it is normal to hear
the noise of boiling water. After this, the noise becomes
less.
• To improve the performance of your appliance, we recom-
mend installing a water softener filter (D7) as described
in section "16. Water softener filter". If your model is not
provided with a filter, you can request one from De'Longhi
Customer Services.
4. TURNING THE APPLIANCE ON
Please note!
Before turning the appliance on, make sure the main switch
(A22) is pressed (fig. 2).
Each time the appliance is turned on, it performs an automatic
preheat and rinse cycle.
• To turn the appliance on, press the button (A15) (fig.
8). The message "HEATING UP UNDERWAY" "PLEASE WAIT"
appears on the display.
• When heating is complete, the message changes to:
"RINSING UNDERWAY" "PLEASE WAIT". As well as heating
the boiler, this also heats the internal circuits by circulating
hot water.
The appliance is ready for use when the main screen (home-
page) appears.
5. TURNING THE APPLIANCE OFF
Whenever the coffee machine is turned off after being used to
make coffee, it performs an automatic rinse cycle.
• To turn the appliance off, press the
button (A15) (fig.
8).
• The message "TURNING OFF UNDERWAY" "PLEASE WAIT"
appears on the display, then (if envisaged) the appliance
performs a rinse cycle and goes off (standby).
Please note!
If you will not be using the appliance for some time, unplug
from the mains socket:
• first turn the appliance off by pressing the button
(fig. 8);
• release the main switch (A22) at the back of the appliance
(fig. 2).
Important!
Never press the main switch while the appliance is on.