Dell XPS L511z Service Manual Download Page 58

Page: 58 / 96

Heat Sink

Replacing the Heat Sink

NOTE:

The original thermal grease can be reused if the original processor and heat

sink are reinstalled together. If either the processor or the heat sink is replaced, use

the thermal pad provided in the kit to ensure that thermal conductivity is achieved.

Follow the instructions in "Before You Begin" on page 9.

Clean the thermal grease from the bottom of the heat sink and reapply it.

Align the seven captive screws on the heat sink with the screw holes on the

system board and tighten the screws in sequential order (indicated on the

heat sink).

Replace the fan (see "Replacing the Fan" on page 56).

Replace the battery (see "Replacing the Battery" on page 18).

Replace the base cover (see "Replacing the Base Cover" on page 15).

heat sink

captive screws (7)

palm-rest assembly

book.book Page 58 Friday, February 21, 2014 12:07 PM

Summary of Contents for XPS L511z

































































































Search results

Summary of Contents for XPS L511z

Reviews:

Related manuals for XPS L511z

Brands by name

Popular brands

Dell XPS L511z, Service Manual

Search results

Summary of Contents for XPS L511z

Reviews:

Related manuals for XPS L511z

Brands by name

Popular brands