Dell XPS L511z Service Manual Download Page 26

Page: 26 / 96

Wireless Mini-Card

Insert the Mini-Card connector at a 45-degree angle into the system-board

connector.

Press the other end of the Mini-Card down into the slot on the system

board and replace the screw that secures the Mini-Card to the system

board.

Connect the appropriate antenna cables to the Mini-Card you are

installing.

Replace the battery (see "Replacing the Battery" on page 18).

Replace the base cover (see "Replacing the Base Cover" on page 15).

CAUTION:

Before turning on the computer, replace all screws and ensure that no

stray screws remain inside the computer. Failure to do so may result in damage to
the computer.

Install the drivers and utilities for your Mini-Card, as required.

NOTE:

If you are installing a Mini-Card from a source other than Dell, you must

install the appropriate drivers and utilities.

Connectors on the Mini-Card

Antenna Cable Color Scheme

WLAN + Bluetooth (2 antenna cables)

Main WLAN + Bluetooth (white triangle)
Auxiliary WLAN + Bluetooth (black triangle)

white
black

book.book Page 26 Friday, February 21, 2014 12:07 PM

Summary of Contents for XPS L511z

































































































Search results

Summary of Contents for XPS L511z

Reviews:

Related manuals for XPS L511z

Brands by name

Popular brands

Dell XPS L511z, Service Manual

Search results

Summary of Contents for XPS L511z

Reviews:

Related manuals for XPS L511z

Brands by name

Popular brands