Dell XPS 420 Owner'S Manual Download Page 98

Page: 98 / 226

Troubleshooting

Troubleshooting LCD Display Problems

LCD display includes a built in self-test which allows the user to diagnose and
troubleshoot any issues related to the application.

To run the Built-in Self-Test

Ensure that the system is switched off.

Press and hold the menu button (see "Understanding Windows®
SideShow™ and the LCD display" on page 50).

Power the system on. Release the menu button.

The system enters diagnostic test menu.

Select

Run All Test.

When all the tests are completed, the screen displays a Passed (displayed
in Green) or Failed (displayed in Red) message.

Note down the error code and the Failed message description and contact
Dell (see "Contacting Dell" on page 200).

book.book Page 98 Tuesday, November 27, 2007 10:29 AM

Summary of Contents for XPS 420



































































































































































































































Search results

Summary of Contents for XPS 420

Reviews:

Dell XPS 420, Owner'S Manual, Page: 98 / 226

Search results

Summary of Contents for XPS 420

Reviews: