manualshive.com logo in svg

Dell XPS 420, Owner'S Manual, Page: 34 / 226

Share
Download
Dell XPS 420 Owner'S Manual Download Page 34

34

Setting Up and Using Your Computer

5

Press the up- and down-arrow keys to select 

RAID0 (Stripe)

, then press 

<Enter>.

6

If there are more than two hard drives available, press the up- and down-arrow 
keys and spacebar to select the two or three drives you want to use to make 
up your configuration, then press <Enter>.

 

NOTE: 

Select the strip size closest to the size of the average file you want to store 

on the RAID volume. If you do not know the average file size, choose 128 KB as your 
strip size.

7

Press the up- and down-arrow keys to change the strip size, then press 
<Enter>.

8

Select the desired capacity for the volume, then press <Enter>. 

The default value is the maximum available size.

9

Press <Enter> to create the volume.

10

Press <Y> to confirm that you want to create the RAID volume.

11

Confirm that the correct volume configuration is displayed on the main 
Intel

®

 RAID Option ROM utility screen.

12

Press the up- and down-arrow keys to select 

Exit

, and then press <Enter>.

13

Install the operating system. See "Reinstalling Windows Vista" on page 97.

Creating a RAID Level 1 Configuration

1

Set your computer to RAID-enabled mode (see "Setting Your Computer to 
RAID-Enabled Mode" on page 33).

2

Press <Ctrl><I> when you are prompted to enter the Intel RAID Option 
ROM utility.

3

Use the up- and down-arrow keys to highlight 

Create RAID Volume

, then 

press <Enter>.

4

Enter a RAID volume name or accept the default name, then press 
<Enter>.

5

Use the up- and down-arrow keys to select 

RAID1 (Mirror)

, then press 

<Enter>.

6

If there are more than two hard drives available, press the up- and down-arrow 
keys and spacebar to select the two drives you want to use to make up your 
volume, then press <Enter>.

book.book  Page 34  Tuesday, November 27, 2007  10:29 AM

Summary of Contents for XPS 420



































































































































































































































Reviews:

No comments