Dell X1000 Series, User Manual

Page: 336 / 416

336
CLI
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_CLI_new.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A R Y 8 / 9 /1 6 - FO R PR O O F O N L Y
The entire copying process may take several minutes and differs from protocol
to protocol and from network to network.
IPv6z Address Format
See IPv6 Address Conventions
Invalid Combinations of Source and Destination
The following are invalid combinations of source and destination files:
• The source file and destination file are the same file.
•
xmodem:
is the destination file. The source file can be copied to
image
,
boot
and
null:
only.
• tftp:// is the source file and destination file on the same copy.
•
*.prv
files cannot be copied.
The following table describes the characters displayed by the system when copy
is being run:
Various Copy Options Guidelines
• Copying an Image File from a Server to Flash Memory
Use the copy source-url flash://image command to copy an image file
from a server to flash memory. When the administrator copies an image
file from the server to a device, the image file is saved to the "inactive"
image. To use this image, the administrator must switch the inactive image
to the active image and reboot. The device will then use this new image.
• Copying a Boot File from a Server to Flash Memory
Use the copy source-url boot command to copy a boot file from a server to
flash memory.
• Copying a Configuration File from a Server to the Running
Configuration File
Character Description
! For network transfers, indicates that the copy process is taking place.
Each exclamation point indicates successful transfer of ten packets
(512 bytes each).
.
For network transfers, indicates that the copy process timed out.