42
Chapter 4
Ericom PowerTerm
®
TEC
Use the
Terminal Emulator Configuration
dialog box (click
Ericom PowerTerm
) to set
Ericom PowerTerm client connection configurations. After configuring, be sure to click
OK
.
Network
Use the Network tab to configure the network settings:
•
Network Connection
or
Serial Connection
- Select
Network Connection
for
connections over TCP/IP, or
Serial Connection
for connections through a serial
port.
•
Description
- Enter a description for the connection.
•
Host
- Enter a host name or IP Address (or select one from the list). Host can be
populated from the global Ericom — PowerTerm
®
TEC connection application.
•
Port
- Enter the port of the host.
•
Terminal Type
- Select a terminal type.
•
Terminal Name
- Enter a name for the terminal.
•
Save Configuration Locally
- Saves the font, color, key-mapping and other settings
of the Ericom — PowerTerm
®
TEC application locally.
Window
Use the Window tab to select the Window Size you want.
Connection
Use the Connection tab to configure the connection settings:
•
Auto Connect
- Starts the connection automatically after system startup.
•
Ping Before Connect
- Pings the connection to see if it is reachable before the
connection is attempted.
•
Auto Reconnect
- Reconnects automatically after a disconnection occurs.
•
Delay before retrying
- Select the amount of time to delay the reconnection
attempt after a disconnection occurs.
