Configuring Connections
39
Network
Use the Network tab to configure the network settings:
•
Server
,
Application Name
, or
Storefront
- Select an option for making the
connection.
•
Description
- Enter a name/label for the connection.
•
Network Protocol
- Select a network protocol.
•
Browser Server
- Enter the Browser Server name (this can be a list of server names
with each name separated by a semi-colon).
TIP
: You do not need to enter a browser server name if you do not want to connect
to either a published application or a server by name. In addition, generating an ICA
connection to a server using a server name in the Server text box for the connection
does not require a Browser Server address, as long as the DNS information is
properly entered.
•
Server
,
Application Name
, or
Store Name
- Select a Server from the Server list, a
Published Application from the Application Name list, or a Store Name from the
Store Name list. If needed, click
Refresh
to refresh the list of servers or published
applications.
NOTE
: With a Storefront option you can also add a store (click
Add
Store
and follow the wizard).
TIP
: You can enter the IP address of the target server as long as there is no need to
resolve a name.
Connection
Use the Connection tab to configure the connection settings:
•
Enable compression
- Enables compression.
•
Low bandwidth
- Enables low-bandwidth optimization.
•
Enable sound
- Enables sound.
•
Ping before connect
- Pings the connection to see if it is reachable before the
connection is attempted.
•
Enable Middle Button Paste
- Enables middle button paste for the mouse.
•
Encryption
- Select an encryption type (default is
Basic
).
Window
Use the Window tab to select the Window Colors and the Window Size you want, and
to disable the panel (if you want the window to appear without the panel while using
the connection).
Application
Use the Application tab to enter the command line and Working Directory of the
application (if you selected the
Published Application
option on the Network tab):
•
Command Line
- Enter the command line for the program on the server.
•
Working Directory
- Enter the working directory for the program.
