Dell WORKSTATION M4600, Owner'S Manual

Page: 56 / 142

Installing The Palm Rest
1. Align the two metal anchors at the bottom edge of the palm rest to the
anchor hooks on the system.
2. Starting from the right edge of the palm rest, press downwards on the
system to engage the tabs.
3. Work your way around the edges and ensure the tabs are fully engaged.
4. Connect all cables to the palm rest.
5. Press down on the memory module until the securing clips secure the
memory module in place.
6. Tighten the captive screws securing the palm rest in place.
7. Tighten the screws securing the palm rest in place.
8. Tighten the screws on the bottom of the system securing the palm rest in
place.
9. Install the
hard drive
.
10. Install the
optical drive
.
11. Install the
keyboard
.
12. Install the
keyboard trim
.
13. Install the
base cover
.
14. Install the
battery
.
15. Follow the procedures in
After Working Inside Your Computer
.
56