Dell WORKSTATION M4600, Owner'S Manual

Page: 114 / 142

Installing The RGB Low-Voltage Differential Signaling (LVDS) Cable
1. Place the low-voltage differential signaling (LVDS) cable on the display
cover.
2. Replace the adhesives to secure the LVDS cable in place.
3. Install the
display hinge, hinge cap, hinge tower
4. Install the
RGB display panel
.
5. Install the
touch screen display bezel
.
6. Install the
display assembly
.
7. Install the
palm rest
.
8. Install the
hard drive
.
9. Install the
optical drive
.
10. Install the
keyboard
.
11. Install the
keyboard trim
.
12. Install the
base cover
.
13. Install the
battery
.
14. Follow the procedures in
After Working Inside Your Computer
.
Removing The RGB Camera Cable
1. Follow the procedures in
Before Working On Your Computer
.
2. Remove the
battery
.
3. Remove the
base cover
.
4. Remove the
keyboard trim
.
5. Remove the
keyboard
.
6. Remove the
optical drive
.
7. Remove the
hard drive
.
8. Remove the
palm rest
.
9. Remove the
display assembly
.
10. Remove the
touch screen display bezel
.
11. Remove the
RGB display panel
.
12. Remove the
display hinge, hinge cap, hinge tower
.
13. Remove the
RGB LVDS cable
14. Disconnect the camera cable from the camera and microphone module.
114