Boot
The Boot tab allows you to change the boot sequence.
Exit
This section allows you to save, discard, and load default settings before exiting from System Setup.
Back to Contents Page
Security
Supervisor Password Is
Specifies whether a supervisor password has been
assigned.
User Password Is
Specifies whether a user password has been
assigned.
Set Supervisor Password
Allows you to set a supervisor password.
Set User Password
Allows you to set a user password. You cannot use
the user password to enter the BIOS setup, during
POST.
Set HDD Password
Allows you to set a password on the computer's
internal hard drive (HDD). The hard drive password is
enabled even when the hard drive is installed on
another computer.
Password on Boot
Enable or disable authentication every time your
computer boots.
Set Service Tag
Allows you to set a service tag when the system
board is replaced.
Service Tag
Displays the current service tag of the computer.
Asset Tag
Displays the asset tag.
Summary of Contents for Vostro V13
Page 32: ...Back to Contents Page ...
