Dell Vostro V13 Service Manual Download Page 38

Page: 38 / 40

Back to Contents Page

Wireless Local Area Network (WLAN) Card

Dell™ Vostro™ V13 Service Manual

Removing the WLAN Card

Follow the procedures in

Before Working Inside Your Computer

Remove the

ExpressCard

, if applicable.

Remove the

SD card

, if applicable.

Remove the

base cover

Remove the

battery

Remove the antenna cables from the WLAN card.

Remove the screw that secures the WLAN card to the system board.

Gently pry the WLAN card from the system board.

Pull the WLAN card away from its connector on the system board and remove it from the computer.

Replacing the WLAN Card

To replace the WLAN Card, perform the above steps in reverse order.

Back to Contents Page

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

NOTE:

You may need to install Adobe

Flash

Player from

Adobe.com

in order to view the illustrations below.

Summary of Contents for Vostro V13









































Search results

Summary of Contents for Vostro V13

Reviews:

Related manuals for Vostro V13

Brands by name

Popular brands

Dell Vostro V13, Service Manual

Search results

Summary of Contents for Vostro V13

Reviews:

Related manuals for Vostro V13

Brands by name

Popular brands