manualshive.com logo in svg

Dell Vostro V13, Service Manual, Page: 30 / 40

Share
Download
Dell Vostro V13 Service Manual Download Page 30

Back to Contents Page

  

Palm Rest and Display Assembly 

Dell™ Vostro™ V13 Service Manual

 

Removing the Palm Rest and Display Assembly 

 

1.

Follow the procedures in 

Before Working Inside Your Computer

.  

2.

Remove the 

ExpressCard

, if applicable.  

3.

Remove the 

SD card

, if applicable.  

4.

Remove the 

base cover

.  

5.

Remove the 

battery

.  

6.

Remove the 

hard drive and audio board

.  

7.

Remove the 

WLAN card

.  

8.

Remove the 

LCD cover

.  

9.

Remove the 

memory

.  

10.

Remove the 

keyboard

.  

11.

Remove the 

card reader

.  

12.

Remove the 

coin-cell battery

.  

13.

Remove the 

system board

.  

14.

Remove the screws on the right of the display hinge. 

  

15.

Remove the screws on the left of the display hinge to release the display assembly from the palm rest. 

  

16.

Release the antennae, camera, and display cables and remove them from the palm rest. 

  

17.

Remove the palm rest from the display assembly. 

  

Replacing the Palm Rest and Display Assembly 

To replace the palm rest and display assembly, perform the above steps in reverse order.  
 

Back to Contents Page

  

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 

NOTE:

 You may need to install Adobe

® 

Flash

® 

Player from 

Adobe.com

 in order to view the illustrations below. 

Summary of Contents for Vostro V13









































Reviews:

No comments