Dell Vostro V13 Service Manual Download Page 34

Page: 34 / 40

Back to Contents Page

SIM Card Reader

Dell™ Vostro™ V13 Service Manual

Removing the SIM Card Reader

Follow the procedures in

Before Working Inside Your Computer

Remove the

ExpressCard

, if applicable.

Remove the

SD card

, if applicable.

Remove the

base cover

Remove the

battery

Slide the white latch to disconnect the flex cable from the SIM card reader.

Remove the screw that secures the SIM card reader to the computer.

Remove the SIM card reader from the computer.

Replacing the SIM Card Reader

To replace the SIM card reader, perform the above steps in reverse order.

Back to Contents Page

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

NOTE:

You may need to install Adobe

Flash

Player from

Adobe.com

in order to view the illustrations below.

Summary of Contents for Vostro V13









































Search results

Summary of Contents for Vostro V13

Reviews:

Related manuals for Vostro V13

Brands by name

Popular brands

Dell Vostro V13, Service Manual

Search results

Summary of Contents for Vostro V13

Reviews:

Related manuals for Vostro V13

Brands by name

Popular brands