manualshive.com logo in svg

Dell Vostro 3700, Service Manual, Page: 31 / 77

Share
Download
Dell Vostro 3700 Service Manual Download Page 31

Back to Contents Page

  

Heat Sink and Fan Assembly 

Dell™ Vostro™ 3700 Service Manual

 

Removing the Heat Sink and Fan Assembly 

 

1.

Follow the procedures in 

Before Working Inside Your Computer

.  

2.

Remove the 

battery

.  

3.

Remove the 

base cover

.  

4.

Remove the 

coin-cell battery

.  

5.

Remove the 

hard drive

.  

6.

Remove the 

optical drive

.  

7.

Remove the 

wireless local area network (WLAN) card

.  

8.

Remove the 

keyboard

.  

9.

Remove the 

palm rest

.  

10.

Remove the 

display assembly

.  

11.

Remove the 

ExpressCard cage

.  

12.

Remove the 

system board

.  

13.

Disconnect the fan cable from its connector on the system board. 

 

14.

Loosen the screws that secure the heat sink and fan assembly to the system board. 

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 

Summary of Contents for Vostro 3700














































































Reviews:

No comments