manualshive.com logo in svg

Dell Vostro 3700, Service Manual, Page: 19 / 77

Share
Download
Dell Vostro 3700 Service Manual Download Page 19

Back to Contents Page

  

Display Assembly 

Dell™ Vostro™ 3700 Service Manual

 

Removing the Display Assembly 

 

1.

Follow the procedures in 

Before Working Inside Your Computer

.  

2.

Remove the 

battery

.  

3.

Remove the 

base cover

.  

4.

Remove the 

wireless local area network (WLAN) card

.  

5.

Remove the 

hard drive

.  

6.

Remove the 

optical drive

.  

7.

Remove the 

keyboard

.  

8.

Remove the 

palm rest

.  

9.

Flip the computer over and release the antenna cables from their routing guides on the computer. 

 

10.

With the right side of the computer facing up, disconnect the display cable from its connector on the system board. 

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 

Summary of Contents for Vostro 3700














































































Reviews:

No comments