SATA Operation
Change the SATA controller
mode to either ATA or
AHCI.
Default: AHCI
Adapter Warnings
Enables or disables adapter
warnings.
Default: Enabled
Function Key Behavior
Specifies the behavior of
the function key <Fn> .
Default: Function key first
Charger Behavior
Specifies if the computer
battery will be charged
when connected to an AC
power source.
Default: Enabled
Miscellaneous Devices
These fields let you enable
or disable various on board
devices.
Security
Set Service Tag
This field displays your system's service
tag. If the service tag is not already set,
this field can be used to enter it.
Set Supervisor Password
Allows you to change or delete the
administrator password.
Set HDD Password
Allows you to set a password on the
computer's internal hard drive (HDD).
Password Bypass
Allows you to bypass the system
password and the internal HDD password
prompts during a system restart/resume
from hibernate state.
Computrace
Enable or disable the Computrace feature
on your computer.
Boot
Boot Priority Order
Specifies the order of different devices in
which the computer will boot through at
start up.
Hard Disk Drives
Specify which hard drive the computer
can boot through.
99
Summary of Contents for Vostro 3550
