manualshive.com logo in svg

Dell Vostro 3550, Owner'S Manual, Page: 104 / 113

Share
Download
Dell Vostro 3550 Owner'S Manual Download Page 104

Video

Video type

•

integrated on system board

•

discrete video card

Video controller and memory

UMA:

Vostro 3350/ 3450/ 3550/ 3750

Intel Graphics Media Accelerator

HD

Vostro 3555

AMD Radeon HD series — up to 256

MB / 512 MB of shared memory

Discrete:

Vostro 3350

AMD Radeon HD6490 GDDR5 - 512

MB

Vostro 3450/ 3550

AMD Radeon HD6630 - 1 GB VRAM

Vostro 3750

NVIDIA GeForce GT 525M - 1 GB

Communications

Network adapter

10/100/1000 Mbps Ethernet LAN

Wireless

internal wireless local area network (WLAN) and

wireless wide area network (WWAN)

Ports and Connectors

Audio

one microphone connector and one stereo

headphones/ external speakers connector

Video

Vostro 3350/ 3450/ 3550/

3555/ 3750

one 19-pin HDMI connector and one 15-pin VGA

connector

Network adapter

one RJ-45 connector

USB

Vostro 3350

two USB 3.0-compliant connectors and one eSATA/

USB 2.0-compliant connector

Vostro 3450

two USB 3.0-compliant connectors, one USB 2.0-

compliant connector and one eSATA/USB 2.0-

compliant connector

104

Summary of Contents for Vostro 3550


















































































































Reviews:

No comments