Dell Vostro 3480 Service Manual Download Page 93

Page: 93 / 93

Getting help

Contacting Dell

Prerequisite

NOTE:

If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip,

bill, or Dell product catalog.

About this task

Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services
may not be available in your area. To contact Dell for sales, technical support, or customer service issues:

Steps

Go to

Dell.com/support.

Select your support category.

Verify your country or region in the

Choose a Country/Region

drop-down list at the bottom of the page.

Select the appropriate service or support link based on your need.

Getting help

Summary of Contents for Vostro 3480






























































































Search results

Summary of Contents for Vostro 3480

Reviews:

Related manuals for Vostro 3480

Brands by name

Popular brands

Dell Vostro 3480, Service Manual

Search results

Summary of Contents for Vostro 3480

Reviews:

Related manuals for Vostro 3480

Brands by name

Popular brands