Dell Vostro 3480 Service Manual Download Page 60

Page: 60 / 93

Remove the

Remove the

Remove the

Remove the

Remove the

Remove the

Steps

Open the latch and disconnect the power button board cable from the system [1].

Peel the power button cable off the palmrest and keyboard assembly [2].

Remove the two (M2x3) screws that secure the power button board to the palmrest and keyboard assembly [3].

Lift the power button board, along with the cable off the palmrest and keyboard assembly [4].

Installing the power button board

Steps

Place the power-button board into the slot on the palmrest and keyboard assembly [1].

Replace the two (M2x3) screws that secure the power button board to the palmrest and keyboard assembly [2].

Affix the power button cable to the palmrest and keyboard assembly [3].

Slide the power button cable to the system board and close the latch to secure the cable [4].

Removing and installing components

Summary of Contents for Vostro 3480






























































































Search results

Summary of Contents for Vostro 3480

Reviews:

Related manuals for Vostro 3480

Brands by name

Popular brands

Dell Vostro 3480, Service Manual

Search results

Summary of Contents for Vostro 3480

Reviews:

Related manuals for Vostro 3480

Brands by name

Popular brands