Back to Contents Page
Coin-Cell Battery
Dell™ Vostro™ 1520 Service Manual
Removing the Coin-Cell Battery
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
battery
from the computer.
3.
Remove the
processor and memory access panel
from the computer.
4.
Remove the
fan
from the computer.
5.
Remove the
heat sink and processor
from the computer.
6.
Remove the
memory
modules from the computer.
7.
Remove the
coin-cell battery
from the computer.
8.
Remove the
hard drive and mini-card access panel
from the computer.
9.
Remove the
hard drive
from the computer.
10.
Remove the
optical drive
from the computer.
11.
Remove the
Bluetooth module
from the computer.
12.
Remove any
WLAN
and
WWAN
cards from the computer.
13.
Remove the
hinge cover
from the computer.
14.
Remove the
keyboard
from the computer.
15.
Remove the
display assembly
from the computer.
16.
Remove the
palm rest
from the computer.
17.
Remove the
system board
from the computer.
18.
Set aside the chassis, and place the systemboard on a clean work surface.
19.
Insert a plastic scribe into slot and gently pry up the coin-cell battery.
20.
Remove the coin-cell battery.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Summary of Contents for Vostro 1520
