Dell Vostro 15-7580, Owner'S Manual, Page: 57 / 105

Installing the display panel
1 Connect the display (eDP) cable to the connector in the display panel.
2 Affix the adhesive tape to secure the display (eDP) cable.
3 Place the display panel to align with the screw holders on the display assembly.
4 Replace the four (M2x2.5) screws to secure the display panel to the display assembly.
5 Install the:
a display bezel
b display assembly
c back cover
d rear cover
e memory module
f WLAN card
g HDD
h SSD card
i battery
j base cover
6 Follow the procedure in After working inside your computer .
eDP-kabel
Removing the eDP cable
1 Follow the procedure in Before working inside your computer .
2 Remove the:
a base cover
b battery
c SSD card
d WLAN card
e HDD
f memory module
g rear cover
h back cover
i display assembly
j display bezel
k display hinge
l display panel
3 Unroute the eDP cable from the routing channel to remove from the display.
Sådan fjernes og installeres komponenter 57