BEMÆRK:
For complete replacement of the back cover, the following parts need to be removed: the Memory, System
Board, Speakers and DC-In cable.
Installing the back cover
1
Press the edges of the back cover until it clicks into place.
2
Close the display assembly and turn over the system.
3
Replace the four (M2x3) and nineteen (M2.5x6) screws to secure the back cover to the system.
4
Connect the power, LED and Keyboard backlight cable, touchpad cable, keyboard cable to the connectors in the system board and
affix the adhesive tape over the keyboard cable.
5
Route the eDP cable through the routing channel and connect the cable to the system.
6
Place the eDP metal bracket and replace the M2x3 screw to secure the eDP to the system.
7
Route the camera and WLAN antenna cables through the routing channel and connect the camera cable to the system board.
8
Install the:
a
b
c
d
9
Follow the procedure in
After working inside your computer
.
Højttaler
Removing the speaker
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
28
Sådan fjernes og installeres komponenter
