Installing the base cover
1
Align the base cover with the screw holder on the system.
2
Press the edges of the cover until it clicks into place.
3
Tighten the M2.5x2+3.5 screw to secure the base cover to the system.
4
Follow the procedure in
After working inside your computer
.
Batteri
Removing the battery
1
Follow the procedure in
Before working inside your computer
.
2
Remove the
3
To remove the battery:
a Disconnect the battery cable from the connector on the system board [1].
b Remove the three (M2x3) screws that secure the battery to the system [2].
12
Sådan fjernes og installeres komponenter
