Installing the hard drive
1
Insert the hard drive into the slot on the system.
2
Replace the M2.5x3 screws to secure the hard drive assembly to the system.
3
Affix the hard drive cable on the system.
4
Connect the hard drive cable to the connector on the system board.
5
Install the:
a
b
6
Follow the procedure in
After working inside your computer
.
Solid-state-drev – valgfrit tilbehør
Removing the M.2 Solid State Drive — SSD
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
3
To remove the SSD:
a Remove the single (M2x3) screw that secures the SSD to the system [1].
b Slide and lift the SSD from the system [2].
Sådan fjernes og installeres komponenter
17
