28
| OLED Screen Protection Mode
OLED Screen Protection Mode
This UP3017Q internal firmware algorithm is able to analyze the image display on the
screen dynamically. Assuming no user is present when there is no content changes for a
prolong period of time, it will turn off the screen.
The Screen Protection Mode feature effectively extends the panel lifespan and reduces
power consumption.
When the screen protection feature is activated, the left side OSD button LED will blink
and the screen will be dimmed and turn off after 5 minutes and 15 sec respectively.
NOTE:
To exit screen protection mode, touch any of the OSD buttons or create some
movements in the screen content, eg drag a window to another location, move the
mouse cursor(left to right edge or top to bottom edge and back).
For a consistent user experience, the appearance of the Screen Protection mode is
designed to behave similar to host PC/Notebook goes to sleep (making the Display
going into Standby mode, the power button LED is blinking during Standby mode). To
recover from Standby, wake the PC/Notebook by the mouse or keyboard. When video
signal is restored, the display will exit Standby.
For the most effective screen protection and best experience, set the display to its native
resolution of 3840x2160. Use vibrant color patterns or pictures as desktop, avoid using
mono-color(eg grey) as desktop pattern. If you intent to leave your workstation, stop or
pause any movie clips or animations.
For best panel (color) performance over time, please set Computer & Display Sleep from
your Operating System to 5 minutes or less.
