4. Disassembly and Assembly Procedures
S15
S14
S13
Remove 2pcs shading tape on the left and right side
of the panel corner, then remove 32pcs acetate
tapes on the specific positions of the back of panel.
Use a Philips-head screwdriver to remove
screws for unlocking power board and interface
board.
9pcs
(No.1 screw size=M4x8, Torque=6
±0.5
kgfxcm;
No.2~9 screw size=M3x7.5, Torque=6
±0.5
kgfxcm)
Remove the circuit boards from the
disconnect all
of the cables.
bracket
chassis module carefully, and then
Turn over the bracket chassis module. Remove the
Mylar from the hooks of the bracket, and then use a
Philips-head screwdriver to remove
screws for
unlocking AC power outlet.
two
(No.1~2 screw size=M3x10, Torque=6
±0.5
kgfxcm)
S16
2
1
7
9
6
8
1
3
4
5
2
