Dell TrueMobile 2300 User Manual Download Page 124

Page: 124 / 178

Back to Contents Page

A Look at the Hardware: Dell™ TrueMobile™ 2300 Wireless
Broadband Router User's Guide

Front Panel

Back Panel

Front Panel

The Dell TrueMobile 2300 Wireless Broadband Router has seven

Light Emitting Diodes

(LEDs), or link lights, on its front side.

The following table defines the behavior for each LED:

LED

Represents

Activity

Power

The Power LED will light up when the device is powered on. It will blink when the
device is reset.

Wireless Wireless

LAN

Steady on when there is at least one wireless link connecting to the unit.

Internet

DSL or

Steady green light indicates the connection is active, blinks with data activity.

Summary of Contents for TrueMobile 2300



















































































































































































Search results

Summary of Contents for TrueMobile 2300

Reviews:

Related manuals for TrueMobile 2300

Brands by name

Popular brands

Dell TrueMobile 2300, User Manual

Search results

Summary of Contents for TrueMobile 2300

Reviews:

Related manuals for TrueMobile 2300

Brands by name

Popular brands