3.
On the
Review Front-End Configuration
page, make sure that the information about the fault
domains is correct.
4.
Click
Next
.
Configure Time Settings
Configure an NTP server to set the time automatically or set the time and date manually.
1.
From the
Region
and
Time Zone
drop-down menus, select the region and time zone used to set the
time.
2.
Select
Use NTP Server
and enter the host name or IPv4 address of the NTP server, or select
Set
Current Time
and set the time and date manually.
3.
Click
Next
.
Configure SMTP Server Settings
Enable SMTP email to receive information from the Storage Center about errors, warnings, and events.
1.
Place a check next to
Enable SMTP Email
.
2.
Enter the SMTP mail server, backup SMTP mail server, email address, and subject line information.
3.
Click
Test Server
to check the connectivity from the Storage Center to the SMTP server.
4.
(Optional) Place a check next to
Use Authorized Login
, and then enter the ID and password.
5.
Click
Next
.
Configure Key Management Server Settings
The Key Management Server Settings page appears if supported by the Storage Center license. Use this
page to enter network settings and select the certificate files.
1.
Enter network settings for the server.
2.
Enter the user name and password.
3.
Select the SSL certificate files.
4.
Click
Next
.
The
Configure Ports
page appears.
Review the SupportAssist Data Collection and Storage
Agreement
The SupportAssist Data Collection and Storage page displays the text of the SupportAssist data
agreement and allows you to accept or opt out of SupportAssist.
1.
To allow SupportAssist to collect diagnostic data and send this information to technical support,
select
By checking this box you accept the above terms
.
2.
Click
Next
.
3.
If you did not select
By checking this box you accept the above terms
, the
SupportAssist
Recommended
pane appears.
• Click
No
to return to the
SupportAssist Data Collection and Storage
page and accept the
agreement.
84
Discover and Configure the Storage Center
