Dell Storage Center SC200 Service Manual Download Page 31

Page: 31 / 36

Dell Compellent

SC200/SC220 Specifications

This section contains technical specifications for the SC200 and SC220 enclosures.

Technical Specifications

The technical specifications of the SC200 and SC220 are displayed in the following tables.

Drives

SAS hard drives

Up to 12 3.5-inch (SC200) or 24 2.5-inch (SC220) SAS
hot-swappable hard drives (6.0 Gbps)

Enclosure Management Modules (EMMs)

EMMs

Two hot-swappable modules with temperature sensors and an audio
alarm

Connectivity

Configurations

Storage Center supports up to 168 drives in each redundant-path
enclosure chain.

Each SC8000 controller supports up to 6 enclosure chains.

Redundant Array of Independent Disks (RAID)

Controller

Dell Compellent SC8000

Management

RAID management using Storage Center System Manager version
6.2 or later

Back-Plane Board

Connectors

•

12 (SC200) or 24 (SC220) SAS hard-drive connectors

•

Two power supply/cooling fan module connectors

•

Two sets of EMM connectors

•

One control panel connector for front LEDs

Sensors

Two temperature sensors

Summary of Contents for Storage Center SC200





































Search results

Summary of Contents for Storage Center SC200

Reviews:

Related manuals for Storage Center SC200

Brands by name

Popular brands

Dell Storage Center SC200, Service Manual

Search results

Summary of Contents for Storage Center SC200

Reviews:

Related manuals for Storage Center SC200

Brands by name

Popular brands