Chapter 2 Replacing SC200/220 Components
16
Storage Center SC200 and SC220 Enclosures Service Guide
Figure 13. Removing an SC220 Hard Drive
5
Press the release button on the replacement hard drive to open the hard drive carrier
release handle.
6
Insert the hard drive carrier into the hard drive bay until the carrier contacts the
backplane.
7
Close the hard drive carrier handle to lock the hard drive in place.
1
Hard drive
2
Release button
3
Hard drive carrier release handle
Note:
Handle the hard drive by the plastic part of the hard drive carrier or the
handle.
Caution:
Do not remove the hard drive blanks that are installed in hard drive
bays that are not occupied. They are needed to ensure proper enclosure cooling.
1
2
3
