3–Adapter Management Applications
Windows Management Applications
CU0354602-00 A
3-27
Viewing Adapter Properties
Issue the following commands to view the adapter properties.
To list all detected QME8242 ports:
qaucli -nic -i [cna_port_inst]
To view QME8242 information:
qaucli -nic -icna [cna_port_inst]
To view port Data Center Bridging Exchange (DCBX) protocol information:
qaucli -nic -idcbx [cna_port_inst]
To view configured port settings:
qaucli -nic -iset [cna_port_inst]
To view physical link status:
qaucli -nic -link [cna_port_inst]
To view port information:
qaucli -nic -pinfo [cna_port_inst]
Changing Adapter Properties
To configure the QME8242 port, issue the following command:
qaucli -nic -n [cna_port_inst] <config_name|config_alias>
<value> [<config_name|config_alias> <value>]
You can set the following properties:
Port_Alias
Port_Physical_MAC_Alias
Port_LAA_MAC_Alias
You can change the variables listed in
Table 3-1
; however, some variables cannot
be changed on specific OSs or configuration states. To determine which ones can
be changed, use the
-c
keyword.
NOTE:
For an adapter that is teamed or an adapter with VLANS, do not directly modify the
adapter properties. To ensure that the properties of all teamed adapters and adapters
with VLANs remain synchronized with the team properties, make property changes
only on the Team Management page (see
“Modifying a Team” on page 3-40
).