3–Adapter Management Applications
Windows Management Applications
3-50
CU0354602-00 A
To run user diagnostics in the GUI:
1.
Access the Windows Control Panel, and then open the Device Manager.
2.
In the Device Manager, right-click the QLogic 10 Gb Ethernet adapter, and
then on the shortcut menu, click
Properties
.
3.
On the adapter properties page, click the
Diagnostics
tab.
Figure 3-17
shows the Diagnostics page.
Figure 3-17. Diagnostics Tests on Windows
4.
Under
Diagnostic Tests
, select one or more check boxes indicating the
tests you want to run:
Hardware Test
,
Register Test
,
Interrupt Test
,
Loopback Test
, and
Link Test
. (
“Windows Diagnostic Test Descriptions” on
page 3-54
describes each test type.)
5.
Click
Run Tests
.
NOTE:
Only one test can run at a time. Multiple tests can run sequentially.